| Product Description | ||||
|
GARAFLEX 131-T IS A OIL RESISTANT, LEAD FREE UNIT SOLE COMPOUND.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
RoHS Compliance
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Coefficient of Friction
|
No Standard | ||
|
-- 2
|
|
|
|
|
-- 3
|
|
|
|
|
vs. Metal - Dynamic 4
|
|
|
|
|
vs. Metal - Static 4
|
|
|
|
|
Taber Abrasion Resistance
|
|||
|
loss, 1000 cycles
|
|
%
|
|
|
loss, 5000 cycles
|
|
%
|
|
|
Ross Flex (-20°F, 0.25 in)
|
|
|
ASTM D1052 |
| Elastomers |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress (100% Strain)
|
|
psi
|
ASTM D412 |
|
Tensile Strength (Yield, 0.0750 in)
|
|
psi
|
ASTM D412 |
|
Tensile Elongation 5 (Break)
|
|
%
|
ASTM D412 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness
|
ASTM D2240 | ||
|
Shore A
|
|
|
|
|
Shore A, 15 sec
|
|
|
|
| Related Terminology | |||
|
This supplier and product may also be known by these terms: Alpha GaryProduct names can be difficult to match. You may have searched any one of these terms to find this product: Garaflex™ GF 131-T, Garaflex GF 131T, Garaflex™ , Garaflex, GaraflexGF131T, GF 131, GF 131-T, GF 131T, GF 131:T, GF 131/T, GF 131+T, GF 131_T, GF 131 T, GF131, 131T, GF131T, GF131_T, Polyvinyl Chloride + NBR, Polyvinyl Chloride NBR, Polyvinyl Chloride : NBR, Polyvinyl Chloride / NBR, Polyvinyl Chloride - NBR, Polyvinyl Chloride _ NBR, Polyvinyl Chloride NBR, PVC+NBR, PVCNBR, PVC:NBR, PVC/NBR, PVC-NBR, PVC_NBR, PVC NBR, Polyvinyl Chloride, PVC, AlphaGary, PolyvinylChlorideNBR, PolyvinylChloride, PolyvinylChloride_NBR, 131GF
|
|||
| Features | |||
|
Features may also be described by the following terms: Low Lead Content.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Rear Temperature
|
|
°F
|
|
|
Middle Temperature
|
|
°F
|
|
|
Front Temperature
|
|
°F
|
|
|
Nozzle Temperature
|
|
°F
|
|
|
Processing (Melt) Temp
|
|
°F
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2vs. Wood - Static |
| 3vs. Wood - Dynamic |
| 4Aluminum |
| 5thickness: 75 mil |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |