Home > Plastics > Materials > INEOS PP > INEOS PP N02G-00 - Datasheet

INEOS PP N02G-00 Datasheet

Polypropylene Impact Copolymer

Supplied by INEOS Olefins & Polymers USA

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Grade N02G-00 is a low melt flow rate, high-impact copolymer polypropylene for sheet extrusion and thick wall injection molding applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Good Stiffness
  • High Impact Resistance
  • Impact Copolymer
  • Low Flow
Uses 
  • Appliances
  • Automotive Applications
  • Compounding
  • Consumer Applications
  • Household Goods
  • Rigid Packaging
  • Sheet
  • Thick-walled Parts
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F, Injection Molded)
psi
ASTM D638
Tensile Elongation (Break, 73°F, Injection Molded)
%
ASTM D638
Flexural Modulus (73°F, Injection Molded)
psi
ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-4°F, 0,125 in, Injection Molded
ft·lb/in
 
73°F, 0,125 in, Injection Molded
 
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
ASTM D648
Additional Information
Tensile Elongation @ Brk, ASTM D638, 73°F, Injection Molded: > 500%
Features
Features may also be described by the following terms: Good Stiffness, Impact Copolymer, High Impact Resistance, Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Compounding, Compounds, Rigid Packaging, Household Goods, Housewares, Automotive Applications, Automotive Sector, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Brochure - General data (English)
Processing - Injection Molding Tips (English)
Processing - Polypropylene (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.