Home > Plastics > Materials > Ecomass® > Ecomass® 1050TU96 - Datasheet

Ecomass® 1050TU96 Data Sheet

Polyamide 12

Tungsten

Supplied by Ecomass Technologies

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Ecomass® 1050TU96 is a Polyamide 12 (Nylon 12) material filled with tungsten. It is available in North America for injection molding.

Important attributes of Ecomass® 1050TU96 are:
  • Good Toughness
  • Non-Toxic
  • Rigid
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Tungsten
Features 
  • Good Toughness
  • High Specific Gravity
  • Non-Toxic
  • Semi Rigid
 
Uses 
  • Radiation Shielding
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Additional Information
Surface Resistivity, ASTM D257: 0.21 ohms/sq
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Good Toughness, Tough, High Specific Gravity, High Density, Non-Toxic, Non Toxic, Toxicity None, Semi-Rigid, Semi Rigid.
Available Documents
Processing - Injection (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.