| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Forms
|
|
| Physical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Density
|
|
--
|
g/cm³
|
ISO 1183/A |
| Mechanical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Tensile Stress (Break)
|
|
|
psi
|
ISO 527-2 |
|
Tensile Strain (Break)
|
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|
|
psi
|
ISO 178 |
| Impact |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
|
|
ft·lb/in²
|
ISO 179/1eA |
|
Charpy Unnotched Impact Strength
|
|
|
ft·lb/in²
|
ISO 179/1eU |
|
Notched Izod Impact Strength
|
|
|
ft·lb/in²
|
ISO 180/1A |
| Hardness |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Shore Hardness (Shore D)
|
|
|
|
ISO 868 |
| Thermal |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
--
|
°F
|
ISO 75-2/Af |
|
Melting Temperature (DSC)
|
|
--
|
°F
|
ISO 3146 |
| Electrical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Surface Resistivity
|
|
|
ohm
|
IEC 60093 |
|
Volume Resistivity
|
|
|
ohm·cm
|
IEC 60093 |
|
Comparative Tracking Index (Solution A)
|
|
--
|
V
|
IEC 60112 |
| Flammability |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Flame Rating (0.0630 in)
|
|
--
|
|
UL 94 |
|
Glow Wire Ignition Temperature
|
|
--
|
°F
|
IEC 60695-2-13 |
|
Oxygen Index
|
|
--
|
%
|
ISO 4589-2 |
| Related Terminology | ||||
|
Dry
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: ADDINYL A2H V25, ADDINYL , ADDINYLA2HV25, A 2 H V 25, A2H V25, A2, 2H, HV, V25, A2HV25, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Addiplast, Polyamide66, Nylon66, 2A
|
|||
| Generic Name | ||||
|
Dry
|
Generic Name may also be described by the following terms: PA66.
|
|||
|
Conditioned
|
Generic Name may also be described by the following terms: PA66.
|
|||
| Features | ||||
|
Dry
|
Features may also be described by the following terms: Halogenated, Contains Halogen.
|
|||
| Uses | ||||
|
Dry
|
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
|
|||
|
Conditioned
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: ADDINYL A2H V25, ADDINYL , ADDINYLA2HV25, A 2 H V 25, A2H V25, A2, 2H, HV, V25, A2HV25, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Addiplast, Polyamide66, Nylon66, 2A
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |