Home > Plastics > Materials > ADDINYL > ADDINYL A2 I - Datasheet

ADDINYL A2 I Data Sheet

Polyamide 66

Supplied by ADDIPLAST

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
ADDINYL A2 I is a Polyamide 66 (Nylon 66) material. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America.

Important attributes of ADDINYL A2 I are:
  • Flame Retardant/Flame Rated
  • Halogen Free
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
 
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Halogen Free
 
Forms 
  • Pellets
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183/A
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
 
ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Hardness
Dry
Conditioned
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
ISO 75-2/Af
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Electric Strength
--
V/mil
IEC 60243-1
Comparative Tracking Index (Solution A)
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating (0,0315 in)
--
 
UL 94
Glow Wire Ignition Temperature
--
°F
IEC 60695-2-13
Oxygen Index
--
%
ISO 4589-2
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.