| General | |
|
Material Status
|
|
|
Availability
|
|
|
Filler / Reinforcement
|
|
|
Features
|
|
|
Forms
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
|
Molding Shrinkage - Flow
|
|
in/in
|
ASTM D955 |
|
Water Absorption (24 hr)
|
|
%
|
ASTM D570 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength
|
|
psi
|
ASTM D638 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D638 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
|
Flexural Strength
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact (73°F, 0.125 in)
|
|
ft·lb/in
|
ASTM D256 |
|
Unnotched Izod Impact (73°F, 0.125 in)
|
|
ft·lb/in
|
ASTM D256 |
|
Gardner Impact
|
|
in·lb
|
ASTM D3029 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Rockwell Hardness
|
ASTM D785 | ||
|
M-Scale
|
|
|
|
|
R-Scale
|
|
|
|
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load
|
ASTM D648 | ||
|
66 psi, Unannealed
|
|
°F
|
|
|
264 psi, Unannealed
|
|
°F
|
|
|
Melting Temperature
|
|
°F
|
|
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Adell PP ER-18HM, Adell PP ER18HM, Adell PP , AdellPPER18HM, AdellPP, PPER 18 HM, ER, PPER-18HM, PPER18HM, PPER:18HM, PPER/18HM, PPER+18HM, PPER_18HM, PPER 18HM, PPER18, PPER, ER 18 HM, ER-18HM, ER18HM, ER:18HM, ER/18HM, ER+18HM, ER_18HM, ER 18HM, ER18, 18HM, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Adell, PolypropyleneHomopolymer, PPHomopolymer, 18ER, 18PPER
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |