Home > Plastics > Materials > Alcryn® > Alcryn® 2370 NC - Datasheet

Alcryn® 2370 NC Data Sheet

Melt Processable Rubber

Supplied by Advanced Polymer Alloys

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Alcryn® 2370 NC is a Melt Processable Rubber (MPR) material. It is available in Asia Pacific, Europe, or North America.

Important attributes of Alcryn® 2370 NC are:
  • RoHS Compliant
  • WEEE Compliant
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Agency Ratings 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Taber Abrasion Resistance
    ASTM D1044
1000 g, CS-17 Wheel
mg
 
1000 g, CS-18 Wheel
mg
 
Elastomers
Nominal Value
Unit
Test Method
Tensile Set
%
ASTM D412
Tensile Stress (100% Strain)
psi
ASTM D412, ISO 37
Tensile Strength (Yield)
psi
ASTM D412, ISO 37
Tensile Elongation (Break)
%
ASTM D412, ISO 37
Tear Strength
     
75°F 2
lbf/in
ASTM D624
75°F
lbf/in
ISO 34-1
Compression Set
     
75°F, 22.0 hr
%
ASTM D395A
158°F, 22.0 hr
%
ASTM D395A
212°F, 22.0 hr
%
ASTM D395A
75°F, 22.0 hr 3
%
ISO 815
158°F, 22.0 hr 3
%
ISO 815
212°F, 22.0 hr 3
%
ISO 815
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240, ISO 868
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746, ISO 812
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air
     
257°F, 168 hr
%
ASTM D573, ISO 188
100% Strain, 257°F, 168 hr
%
ASTM D573
100% Strain 257°F, 168 hr
%
ISO 188
Change in Ultimate Elongation in Air (257°F, 168 hr)
%
ASTM D573, ISO 188
Change in Volume
     
212°F, 168 hr, in ASTM Oil #1
%
ASTM D471
212°F, 168 hr, in IRM 903 Oil #3
%
ASTM D471
212°F, 168 hr, in Water
%
ASTM D471, ISO 1817
212°F, 168 hr, in ASTM #1 Oil
%
ISO 1817
212°F, 56880 hr, in IRM 903 Oil #3
%
ISO 1817
Fill Analysis
Nominal Value
Unit
Test Method
Apparent Viscosity (374°F, 300 sec^-1)
Pa·s
ASTM D3835
Related Terminology
This supplier and product may also be known by these terms: APA, Advanced Polymer Alloys is a division of Ferro
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Available Documents
Processing - Calendering (English)
Processing - Compression Molding (English)
Processing - Extrusion (English)
Processing - Extrusion Blow Molding (English)
Processing - Injection Molding (English)
Processing - Injection Molding Parameters (English)
Processing - Overmolding (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
3Type A
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.