Home > Plastics > Materials > Samsung Total PP > Samsung Total PP RS401 - Datasheet

Samsung Total PP RS401 Data Sheet

Polypropylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SAMSUNG TOTAL RS401 is a propylene-ethylene copolymer used for flat boards, and stationery cases or boxes and packaging.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
 
Features 
  • Good Processability
  • High Impact Resistance
  • Opticals
  • Random Copolymer
  • Soft
Uses 
  • Packaging
  • Sheet
  • Stationary Supplies
  • Video Tapes
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Random Copolymer, Good Processability, Easy Processing, High Impact Resistance.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Adapter Temperature
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.