Home > Plastics > Materials > Borealis PP > Borealis PP HG385MO - Datasheet

Borealis PP HG385MO Data Sheet

Polypropylene Homopolymer

Supplied by Borealis AG

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
HG385MO is a polypropylene homopolymer intended for injection moulding. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. It is produced using the Borealis Controlled Crystallinity Polypropylene (CCPP) technology, which provides polypropylene with very effective nucleation. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction.

Products moulded from this grade exhibit excellent dimension consistency combined with high stiffness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Antistatic
  • Nucleating Agent
  • Slip
Features 
  • Antistatic
  • Fast Molding Cycle
  • Good Flow
  • Good Mold Release
  • High Stiffness
  • Homopolymer
  • Narrow Molecular Weight Distribution
  • Nucleated
  • Slip
Uses 
  • Caps
  • Closures
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Yield)
%
ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
ISO 75-2/B
Features
Features may also be described by the following terms: Good Flow, Narrow Molecular Weight Distribution, Narrow MW Distribution, Slip, Unspecified Slip, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Mold Release, Easy Release, Good Demolding, High Stiffness.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Holding Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.