| Product Description | ||||
|
Thermoplastic parts from filled PI (polyimide) for balanced mechanical properties and low wear and friction performance in high temperature hostile environments.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
|
RoHS Compliance
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
|
Resin ID (ISO 1043)
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity 2
|
|
|
ASTM D792 |
|
Water Absorption (73°F, 24 hr)
|
|
%
|
ASTM D570 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus (73°F)
|
|
psi
|
ASTM D638 |
|
Tensile Strength
|
ASTM D638 | ||
|
73°F
|
|
psi
|
|
|
302°F
|
|
psi
|
|
|
Tensile Elongation (Break, 302°F)
|
|
%
|
ASTM D638 |
|
Flexural Modulus
|
ASTM D790 | ||
|
73°F
|
|
psi
|
|
|
302°F
|
|
psi
|
|
|
Flexural Strength
|
ASTM D790 | ||
|
73°F
|
|
psi
|
|
|
302°F
|
|
psi
|
|
|
Compressive Stress (73°F)
|
|
psi
|
JIS K7208 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256 |
|
Unnotched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D4812 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load (264 psi, Unannealed)
|
|
°F
|
ASTM D648 |
|
Glass Transition Temperature (DSC)
|
|
°F
|
ASTM D3418 |
|
CLTE
|
ASTM E228 | ||
|
Flow: 302°F
|
|
in/in/°F
|
|
|
Transverse: 302°F
|
|
in/in/°F
|
|
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vespel® TP-8556, Vespel TP8556, Vespel® , Vespel, VespelTP8556, TP, TP-8556, TP8556, TP:8556, TP/8556, TP+8556, TP_8556, TP 8556, Polyimide, Thermoplastic, Polyimide Thermoplastic, PI, TP, PI TP, Polyimide, PI, DuPont, PolyimideThermoplastic, PITP, 8556TP
|
|||
| Features | |||
|
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Friction, High Heat Resistance, Good Thermal Aging Resistance, Thermal Aging Resistant, Ultrasonic Weldable.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 223°C |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |