Home > Plastics > Materials > Adell PP > Adell PP EP-36 - Datasheet

Adell PP EP-36 Data Sheet

Polypropylene

30% Glass Fiber

Supplied by Adell Plastics, Inc.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Adell PP EP-36 is a Polypropylene material filled with 30% glass fiber. It is available in North America.

Typical application of Adell PP EP-36: Automotive
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Automotive Specifications 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
in/in
ASTM D955
Water Absorption (24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength (Yield)
psi
ASTM D790
Compressive Strength
psi
ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
    ASTM D785
M-Scale
 
 
R-Scale
 
 
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Melting Temperature
°F
 
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.