IDES Prospector Already have an account? Login Here

Alcryn® 2095 BK Data Sheet

Melt Processable Rubber

Supplied by Advanced Polymer Alloys

Home > Plastics > Alcryn® > Alcryn® 2095 BK Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • UV Stabilizer
Features 
  • Good UV Resistance
  • Good Weather Resistance
  • High Flow
  • High Heat Resistance
  • Noise Damping
  • Oil Resistant
  • Ozone Resistant
  • Vibration Damping
Uses 
  • Cable Jacketing
  • Engineering Parts
  • Fabrics
  • Gaskets
  • Handles
  • Hose
  • Seals
  • Sheet
  • Tubing
  • Weatherstripping
  • Wire Jacketing
Agency Ratings 
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Compression Molding
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.0750 in, Compression Molded)
psi
 ASTM D638, ISO 527-2
Tensile Strength (Yield, 0.0750 in, Compression Molded)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break, 0.0750 in, Compression Molded)
%
 ASTM D638, ISO 527-2
Elastomers
Nominal Value
Unit
Test Method
Tensile Set
%
 ASTM D412
Tear Strength 2 (75°F)
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 0.0750 in, Compression Molded)
 
 ASTM D2240
IRHD Hardness
 
 ISO 48
Aging
Nominal Value
Unit
Test Method
Change in Volume
     ASTM D471
75°F, 168 hr, in Reference Fuel B
%
  
212°F, 168 hr, in ASTM Oil #1
%
  
212°F, 168 hr, in ASTM Oil #3
%
  
Additional Information
The value listed as Density-Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.
Fluid Resistance 7 Days in ASTM Oil no. 1, ISO 1817, at 212 °F: -1%
Fluid Resistance 7 Days in IRM 903 Oil no. 3, ISO 1817, at 212 °F: 31%
Fluid Resistance 7 Days in ASTM Ref. Fuel no. B, ISO 1817, at 75 °F: 43%
Rheological Viscosity, ASTM D3835, 1/300s at 374°F: 820Pa-s
Related Terminology
This supplier and product may also be known by these terms: APA, Advanced Polymer Alloys is a division of FerroProduct names can be difficult to match. You may have searched any one of these terms to find this product: Alcryn® 2095 BK, Alcryn 2095 BK, Alcryn® , Alcryn, Alcryn2095BK, 2095 BK, 2095BK, Melt Processable Rubber, MPR, Thermoplastic Elastomer, TPE, APA, MeltProcessableRubber, ThermoplasticElastomer, BK2095
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant, High Heat Resistance, High Flow, High Melt, High MFI, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Engineering Parts, Tubing, Tube.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.