Home > Plastics > Materials > Bormod™ > Bormod™ BE961MO - Datasheet

Bormod™ BE961MO Data Sheet

Polypropylene Copolymer

Supplied by Borealis AG

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
BE961MO is a heterophasic copolymer. This grade is characterized by an optimum combination of high stiffness, low creep and very high impact strength.

This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction. Products originating from this grade have very good demoulding properties, well-balanced mechanical properties, excellent dimension consistency with respect to different colors and good organoleptic properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
  • North America
Additive 
  • Nucleating Agent
Features 
  • Copolymer
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Flow
  • Good Mold Release
  • Good Organoleptic Properties
  • High Stiffness
  • Nucleated
  • Recyclable Material
  • Ultra High Impact Resistance
Uses 
  • Crates
  • Engineering Parts
  • Luggage
  • Pails
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Yield)
%
ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Multi-Axial Instrumented Impact Energy
    ISO 6603-2
-4°F, Total Penetration Energy
ft·lb
 
32°F, Total Penetration Energy
ft·lb
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
ISO 75-2/B
Features
Features may also be described by the following terms: Ultra High Impact Resistance, Good Organoleptic Properties, Good Mold Release, Easy Release, Good Demolding, High Stiffness, Good Flow, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Engineering Parts.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Holding Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.