Home > Plastics > Materials > Alathon® ETP > Alathon® ETP H5656 - Datasheet

Alathon® ETP H5656 Data Sheet

High Density Polyethylene

Supplied by LyondellBasell Industries

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
ALATHON H5656 is a high-flow injection molding grade of resin designed for thin-wall molding. This resin exhibits enhanced processing and thermal stability for fast cycling in multi-cavity stack molds, good color and organoleptic properties. Typical pplications include rigid packaging such as promotional drink cups and deli containers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
 
Features 
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Organoleptic Properties
  • Good Processability
  • Good Thermal Stability
  • High Flow
Uses 
  • Containers
  • Cups
  • Packaging
  • Thin-walled Parts
 
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Apparent Density
g/cm³
ASTM D1895
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Spiral Flow 2, 3
in
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 4
    ASTM D638
--
psi
 
1% Secant
psi
 
Tensile Strength 5 (Break)
psi
ASTM D638
Tensile Elongation 5 (Break)
%
ASTM D638
Flexural Modulus
    ASTM D790
--
psi
 
1% Secant  6
psi
 
2% Secant  6
psi
 
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Unnotched Izod Impact (0°F)
ft·lb/in
ASTM D4812
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525
Peak Melting Temperature
°F
ASTM D3418
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel
Features
Features may also be described by the following terms: Good Thermal Stability, Good Processability, Easy Processing, Good Organoleptic Properties, High Flow, High Melt, High MFI, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Processing - Mold Shrink (English)
Processing - Polyolefin Injection Molding Guide (English)
Processing - Start-Up Guide (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Melt Temperature: 440°F, Injection Pressure: 1,00E+3 psi
30.0625 in
4Type I, 2,0 in/min
5Type IV, 2,0 in/min
60,49 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.