Home > Plastics > Materials > ALKAMIX™ > ALKAMIX™ MB6009 - Datasheet

ALKAMIX™ MB6009 Data Sheet

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
ALKAMIX MB6009 is formulated with an antiblock additive at a concentration of 15 percent.

ALKAMIX MB6009 can be added to polythene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent.

The maximum level of addition of ALKAMIX MB6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock (15%)
Features 
  • Antiblocking
Uses 
  • Blending
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock.
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.