Home > Plastics > Materials > REPOL® > REPOL® B400MN - Datasheet

REPOL® B400MN Datasheet

Polypropylene Impact Copolymer

Supplied by Reliance Industries Limited

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
Repol B400MN is recommended for use in Injection Moulding processes where high flow and medium impact strength are required. It is an ideal material to use in appliance parts, automotive components, grilled products and thin wall products. Repol B400MN contains nucleating agent.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Nucleating Agent
Features 
  • Food Contact Acceptable
  • High Flow
  • Medium Impact Resistance
  • Nucleated
 
Uses 
  • Appliance Components
  • Automotive Applications
  • Compounding
  • Thin-walled Parts
 
Agency Ratings 
Processing Method 
  • Compounding
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
ASTM D638
Flexural Modulus - 1% Secant (Injection Molded)
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
ASTM D648
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Medium Impact Resistance.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Automotive Applications, Automotive Sector, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Compounding, Compounds.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.