Home > Plastics > Materials > REPOL® > REPOL® H350FG - Datasheet

REPOL® H350FG Data Sheet

Polypropylene Homopolymer

Supplied by Reliance Industries Limited

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Repol H350FG is recommended for use in compact Fibre Spinning operations, for making fine denier multifilament yarns and non-wovens. Repol H350FG has excellent uniformity needed for high speed spinning of fine deniers. Repol H350FG contains an excellent process stabilizer package suitable for non-woven and filament products. Fomulated for gas fading resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Anti-gas fading
  • Processing Stabilizer
 
Features 
  • Food Contact Acceptable
  • Gas-fading Resistant
 
Uses 
  • BCF Yarn
  • Fibers
  • Filaments
  • Nonwovens
 
Agency Ratings 
Processing Method 
  • Fiber (Spinning) Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
ASTM D638
Flexural Modulus - 1% Secant (Injection Molded)
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Features
Features may also be described by the following terms: Gas-fading Resistant, Gas Fading Resistant.
Uses
Uses may also be described by the following terms: BCF Yarn, Non-wovens, Non-woven, Nonwoven, Nonwovens.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.