Home > Plastics > Materials > SABIC® Vestolen A > SABIC® Vestolen A 5061R 10000 - Datasheet

SABIC® Vestolen A 5061R 10000 Data Sheet

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® Vestolen A 5061R 10000 (black) is a grade, which has a high density and a bimodal distribution of the molecular mass. A universal grade for pipe extrusion which, due to a keen combination of properties, is particularly suitable for drinking water and waste water piping. It is also used for the manufacture of chemical apparatus and containers. This material meets (inter)national standards for use in drinking water and wastewater piping.
MRS class ISO 12162 MPa = 8.0 (PE 80).

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Carbon Black (2%)
Features 
  • Bimodal Molecular Weight Distribution
  • High Density
 
Uses 
  • Containers
  • Piping
 
Agency Ratings 
 
Appearance 
  • Black
Processing Method 
  • Extrusion
  • Pipe Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/2.16 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0,0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Stress (Yield, 0,0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Strain (Yield, 0,0787 in, Compression Molded)
%
ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Melting Temperature
°F
DIN 53765
Oxidation Induction Time (410°F)
min
ISO 11357-6
Additional Information
Nominal Value
Unit
Test Method
Color Number - RAL
 
 
MRS Classification
psi
ISO 12162
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ISO (2), EN (2).
Available Documents
Processing - Extrusion (English)
Processing - Sheet Extrusion (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.