Home > Plastics > Materials > SABIC® Vestolen A > SABIC® Vestolen A 4062R y - Datasheet

SABIC® Vestolen A 4062R y Data Sheet

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® Vestolen A 4062R y is a High Density Polyethylene product. It can be processed by extrusion or pipe extrusion and is available in Europe. Applications of SABIC® Vestolen A 4062R y include containers, food contact applications, plumbing/piping/potable water and sheet.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Uses 
  • Containers
  • Piping
  • Sheet
Agency Ratings 
 
Appearance 
  • Yellow
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/2.16 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0,0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Stress (Yield, 0,0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Strain (Yield, 0,0787 in, Compression Molded)
%
ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 15 sec, Compression Molded)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Additional Information
OIT 210°C, EN 728: >20 min
MRS Classification, ISO 12162: 8 MPa
Melting Point, SABIC Method, DSC: 122 to 126°C
RAL Number: 1018
Color Code: 62429
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).
Available Documents
Processing - Extrusion (English)
Processing - Sheet Extrusion (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.