Home > Plastics > Materials > SABIC® PP > SABIC® PP 523K - Datasheet

SABIC® PP 523K Data Sheet

Polypropylene Homopolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® PP 523K is a nucleated grade and provides therefore high stiffness, more transparency and gloss if compared to conventional homopolymers. Moreover, it is formulated with a combined processing and antistatic package. SABIC® PP 523K is used for thermoformed food and drink containers.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Additive 
  • Antistatic
  • Nucleating Agent
 
Features 
  • Antistatic
  • High Gloss
  • High Stiffness
  • Homopolymer
  • Nucleated
  • Opticals
Uses 
  • Cups
  • Food Containers
  • Thermoformed Containers
Forms 
  • Pellets
Processing Method 
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus 2
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Additional Information
Anti block agent: No
Slip agent: No
Anti static agent: Yes
Nucleating agent: Yes
Anti gas fading: No
Features
Features may also be described by the following terms: High Stiffness, High Gloss.
Uses
Uses may also be described by the following terms: Thermoformed Containers, Thermoformed Container, Food Containers, Food Container.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.