Home > Plastics > Materials > SABIC® PP > SABIC® PP 576P - Datasheet

SABIC® PP 576P Data Sheet

Polypropylene Homopolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® PP 576P is a PP homopolymer grade that has good flow properties and a narrow molecular weight distribution. Products made from SABIC® PP 576P typically have low warpage, high stiffness in combination with moderate impact strength at room temperature and a high gloss.

SABIC® PP 576P is typically used in caps & closures and thin wall packaging both in food and non-food segments.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
  • High Gloss
  • High Stiffness
  • Homopolymer
  • Low Warpage
  • Medium Impact Resistance
  • Narrow Molecular Weight Distribution
Uses 
  • Caps
  • Closures
  • Food Packaging
  • Packaging
 
Automotive Specifications 
UL File Number 
  • E111275
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
1% Secant  2
psi
ASTM D638
--
psi
ISO 527-2/1A/1
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/1A/50
Tensile Elongation
     
Yield 3
%
ASTM D638
Yield
%
ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact
     
73°F
ft·lb/in
ASTM D256A
73°F
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Shore Hardness (Shore D)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648
66 psi, Unannealed 4
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed 4
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ASTM D1525 5, ISO 306/A120 5
--
°F
ASTM D1525 6, ISO 306/B120 6
Features
Features may also be described by the following terms: High Stiffness, Narrow Molecular Weight Distribution, Narrow MW Distribution, High Gloss, Good Flow, Medium Impact Resistance, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Food Packaging, Closure Caps, Caps, Cap.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Available Documents
Technical Datasheet (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
32.0 in/min
4testbar 80*10*4mm
5Rate B (120°C/h), Loading 1 (10 N)
6Rate B (120°C/h), Loading 2 (50 N)
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.