Home > Plastics > Materials > SABIC® PP > SABIC® PP 505P - Datasheet

SABIC® PP 505P Data Sheet

Polypropylene Homopolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® PP 505P is a multi purpose grade for extrusion and injection moulding applications.

SABIC® PP 505P provides an excellent stretch ability and is suitable for extrusion of tapes, strapping, high tenacity yarns but also for thermoformed articles. For injection moulded parts SABIC® PP 505P shows a moderate stiffness, good impact resistance and very good surface hardness. SABIC PP505P is suitable for production of caps and closures and house ware articles.

SABIC® PP 505P is a low mfi grade typically used in extrusion applications like sheet and thermoforming.

SABIC® PP 505P is typically used in dairy, flower pots, yellow fats and disposables plates and cups. However, customers use this grade also in combination with fillers like Talc and CaCO3.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Impact Resistance
  • High Hardness
  • Homopolymer
  • Medium Isotactic
  • Wide Molecular Weight Distribution
Uses 
  • Caps
  • Closures
  • Cups
  • Disposable Drinkware
  • Household Goods
  • Sheet
  • Strapping
  • Tape
  • Yarn
Automotive Specifications 
UL File Number 
  • E111275
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Fiber (Spinning) Extrusion
  • Filament Extrusion
  • Injection Molding
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
1% Secant  2
psi
ASTM D638
--
psi
ISO 527-2/1A/1
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/1A/50
Tensile Elongation
     
Yield 3
%
ASTM D638
Yield
%
ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact
     
73°F
ft·lb/in
ASTM D256A
73°F
ft·lb/in²
ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648
66 psi, Unannealed 4
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed 4
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ASTM D1525 5, ISO 306/A 5
--
°F
ASTM D1525 6, ISO 306/B 6
Features
Features may also be described by the following terms: Good Impact Resistance, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, Medium Isotactic, Medium Isotacticity, High Hardness, Hard.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Household Goods, Housewares, Disposable Drinkware.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Available Documents
Processing - Extrusion (English)
Processing - Sheet Extrusion (English)
Processing - Tape (English)
Technical Datasheet (English)
Technical Datasheet (English)
Technical Datasheet (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
32.0 in/min
4testbar 80*10*4mm
5Rate B (120°C/h), Loading 1 (10 N)
6Rate B (120°C/h), Loading 2 (50 N)
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.