Home > Plastics > Materials > SABIC® PP > SABIC® PP 522L - Datasheet

SABIC® PP 522L Data Sheet

Polypropylene Homopolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® PP 522L is particularly designed for extrusion of cast film, both mono layer films and co extruded films. It provides an excellent combination of transparency, stiffness and high heat resistance. It contains a slip agent and anti block additive package. SABIC®PP 522L is the formulated version of SABIC®PP 520P.

SABIC® PP 522L is typically used for food packaging, lamination film, stationary film, textile packaging, flower packaging, and hygiene packaging.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock
  • Slip
 
Features 
  • Antiblocking
  • High Clarity
  • High Heat Resistance
  • High Stiffness
  • Homopolymer
  • Medium Isotactic
  • Slip
  • Wide Molecular Weight Distribution
Uses 
  • Cast Film
  • Film
  • Food Packaging
  • Laminates
  • Packaging
  • Stationary Supplies
Automotive Specifications 
UL File Number 
  • E111275
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Coextrusion
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
1% Secant  2
psi
ASTM D638
--
psi
ISO 527-2/1A/1
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/1A/50
Tensile Elongation
     
Yield 3
%
ASTM D638
Yield
%
ISO 527-2/1A/50
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
     
--
°F
ASTM D1525 4, ISO 306/A120 4
--
°F
ASTM D1525 5, ISO 306/B120 5
Features
Features may also be described by the following terms: High Stiffness, Slip, Unspecified Slip, High Clarity, Antiblocking, Unspecified Antiblock, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, High Heat Resistance, Medium Isotactic, Medium Isotacticity.
Uses
Uses may also be described by the following terms: Food Packaging, Cast Film.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Available Documents
Processing - BOPP Film (English)
Processing - Cast Film (English)
Processing - Tape (English)
Technical Datasheet (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
32.0 in/min
4Rate B (120°C/h), Loading 1 (10 N)
5Rate B (120°C/h), Loading 2 (50 N)
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.