| Product Description | ||||
|
This grade combines an excellent stiffness with very good impact strength. It has a narrow molecular weight distribution and a very low tendency to warp. The easy flow, in combination with the high crystallisation temperature enables outstanding processability aimed at easy mould filling and short cycletimes. Due to the mentioned performance this grade is very suitable for usage in several kinds of containers. Because of its high gloss level this material is also suitable for household applications.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
UL File Number
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress
|
ISO 527-2 | ||
|
Yield
|
|
psi
|
|
|
Break
|
|
psi
|
|
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179 | ||
|
-4°F
|
|
ft·lb/in²
|
|
|
32°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Notched Izod Impact Strength
|
ISO 180/4A | ||
|
-4°F
|
|
ft·lb/in²
|
|
|
32°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Shore Hardness (Shore D)
|
|
|
ISO 868 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature
|
|||
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Vicat Softening Temperature
|
|||
|
--
|
|
°F
|
ISO 306/A |
|
--
|
|
°F
|
ISO 306/B |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 58MNK10, SABIC PP 58MNK10, SABIC® PP , SABIC PP, SABICPP58MNK10, SABICPP, PP 58 MNK 10, PP58MNK10, PP58, PP, 58 MNK 10, 58MNK10, 58MNK, MNK10, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, SABIC, PolypropyleneImpactCopolymer, PPImpactCopolymer, MNK58, 58PP
|
|||
| Features | |||
|
Features may also be described by the following terms: Low Warpage, Low Warp, Good Stiffness, Good Processability, Easy Processing, Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Impact Resistance, High Gloss, Good Flow, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Block Copolymer.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Household Goods, Housewares.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |