| Product Description | ||||
|
This grade has a high impact resistance, even at low temperatures, and a high stiffness. It is used in a variety of applications e.g. containers and crates & boxes. It is also used in automotive components, like for example battery cases.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
UL File Number
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress
|
ISO 527-2 | ||
|
Yield
|
|
psi
|
|
|
Break
|
|
psi
|
|
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179 | ||
|
-4°F
|
|
ft·lb/in²
|
|
|
32°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Notched Izod Impact Strength
|
ISO 180/4A | ||
|
-4°F
|
|
ft·lb/in²
|
|
|
32°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Shore Hardness (Shore D)
|
|
|
ISO 868 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature
|
|||
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Vicat Softening Temperature
|
|||
|
--
|
|
°F
|
ISO 306/A |
|
--
|
|
°F
|
ISO 306/B |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 56M10, SABIC PP 56M10, SABIC® PP , SABIC PP, SABICPP56M10, SABICPP, PP 56 M 10, PP56M10, PP56, PP, 56 M 10, 56M10, 56M, M10, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, SABIC, PolypropyleneImpactCopolymer, PPImpactCopolymer, M56, 56PP
|
|||
| Features | |||
|
Features may also be described by the following terms: High Stiffness, High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Block Copolymer.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |