IDES Prospector Already have an account? Login Here

SABIC® PP 513MNK40 Data Sheet

Polypropylene Impact Copolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

Home > Plastics > SABIC® PP > SABIC® PP 513MNK40 Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
This very high flow grade shows a medium impact resistance, even at low temperatures, combined with high stiffness. SABIC® PP 513MNK40 is provided with an anti-staticum package. It is used for high speed processing of thin walled packaging articles like margarine tubs, ice cream containers and flowerpots. SABIC® PP 513MNK40 can also be applied for use in caps and closures, toys and housewares. This grade is also available without anti-static additives.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antistatic
Features 
  • Antistatic
  • Block Copolymer
  • Fast Molding Cycle
  • High Flow
  • High Stiffness
  • Low Temperature Impact Resistance
  • Medium Impact Resistance
Uses 
  • Caps
  • Closures
  • Food Containers
  • Household Goods
  • Thin-walled Containers
  • Toys
UL File Number 
  • E111275
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/4A
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A
--
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 513MNK40, SABIC PP 513MNK40, SABIC® PP , SABIC PP, SABICPP513MNK40, SABICPP, PP 513 MNK 40, PP513MNK40, PP513, PP, 513 MNK 40, 513MNK40, 513MNK, MNK40, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, SABIC, PolypropyleneImpactCopolymer, PPImpactCopolymer, MNK513, 513PP
Features
Features may also be described by the following terms: High Stiffness, High Flow, High Melt, High MFI, Medium Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Block Copolymer.
Uses
Uses may also be described by the following terms: Thin-Walled Containers, Thin-Walled Container, Thin-Wall Containers, Thin-Wall Container, Thinwall Containers, Thinwall Container, Closure Caps, Caps, Cap, Food Containers, Food Container, Household Goods, Housewares.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.