Home > Plastics > Materials > LITEN > LITEN ML 67 - Datasheet

LITEN ML 67 Data Sheet

Polyethylene Copolymer

Supplied by UNIPETROL RPA

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
LITEN ML 67 is a linear polyethylene, copolymer with narrow molecular weight distribution and higher resistance to UV radiation, intended for injection moulding. It is suitable for manufacture of large containers, pallets, technical parts and other products for outdoor use, requiring very good impact strength.

LITEN ML 67 meets the hygienic requirements on materials and articles intended for contact with foodstuffs according to Regulation (EC) 1935/2004 of the European Parliament and of the Council, as well as according to Commission Regulation (EU) No 10/2011 including changes and additions.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good UV Resistance
  • Narrow Molecular Weight Distribution
Uses 
  • Containers
  • Engineering Parts
  • Outdoor Applications
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/2.16 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Yield)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Engineering Parts.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), EC (1).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.