Home > Plastics > Materials > Rotec® ABS > Rotec® ABS 1001 FRVO/1 - Datasheet

Rotec® ABS 1001 FRVO/1 Data Sheet

Acrylonitrile Butadiene Styrene

Supplied by ROMIRA GmbH

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Rotec® ABS 1001 FRVO/1 is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in Europe. Primary attribute of Rotec® ABS 1001 FRVO/1: Flame Retardant/Flame Rated.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
UL File Number 
  • 148878
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
ISO 294-4
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Flexural Strength (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Additional Information
Most tests were performed under DIN test standards.
Density, DIN 53479, 23°C, 50% RH: 1.18 g/ml
Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Natural: 7 kJ/m²
Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Color: 6 kJ/m²
Charpy Unnotched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, 80x10x4, Color/Natural: 60 kJ/m²
Available Documents
Processing - Extrusion (English)
Processing - Injection Molding (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.