Home > Plastics > Materials > Braskem PP > Braskem PP TI4350P - Datasheet

Braskem PP TI4350P Data Sheet

Polypropylene Impact Copolymer

Supplied by Braskem America Inc.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Sub-group
Impact Copolymer

Description
Good balance of stiffness and impact strength, excellent organoleptic properties, high melt flow

Applications
Suggested uses include compounding, thin-walled injection molding
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Organoleptic Properties
  • Good Stiffness
  • High Flow
  • Impact Copolymer
Uses 
  • Compounding
  • Thin-walled Parts
 
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
ASTM D638
Flexural Modulus - 1% Secant  3 (Injection Molded)
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
ASTM D785
Features
Features may also be described by the following terms: Impact Copolymer, Good Stiffness, Good Impact Resistance, Good Organoleptic Properties, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Compounding, Compounds, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.050 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.