Home > Plastics > Materials > Delrin® > Delrin® 100AL NC010 - Datasheet

Delrin® 100AL NC010 Data Sheet

ACETAL RESIN

Supplied by DuPont Performance Polymers

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Delrin® 100AL NC010 an unreinforced, high viscosity, lubricated acetal homopolymer resin, containing an advanced system of lubrication for low wear and friction against metals and plastics.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Lubricant
Features 
  • Good Creep Resistance
  • Good Wear Resistance
  • High Impact Resistance
  • High Viscosity
  • Homopolymer
  • Low Friction
  • Lubricated
  • Ultrasonic Weldable
Uses 
  • Conveyors
  • Engineering Parts
  • Gears
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Part Marking Code (ISO 11469)
  • >POM-S<
Resin ID (ISO 1043)
  • POM-S
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
ISO 1133
Molding Shrinkage
    ISO 294-4
Across Flow : 0.0787 in
%
 
Flow : 0.0787 in
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress (Yield, 73°F)
psi
ISO 527-2
Tensile Strain
     
Yield, 73°F
%
ISO 527-2
Break, 73°F
%
ISO 527-2/50
Nominal Tensile Strain at Break (73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Melting Temperature 2
°F
ISO 11357-3
CLTE
    ISO 11359-2
Flow : -40 to 73°F
in/in/°F
 
Flow : 73 to 131°F
in/in/°F
 
Flow : 131 to 212°F
in/in/°F
 
Transverse : -40 to 73°F
in/in/°F
 
Transverse : 73 to 131°F
in/in/°F
 
Transverse : 131 to 212°F
in/in/°F
 
RTI Elec
    UL 746
0.0295 in
°F
 
0.118 in
°F
 
RTI Imp
    UL 746
0.0295 in
°F
 
0.118 in
°F
 
RTI Str
    UL 746
0.0295 in
°F
 
0.118 in
°F
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94, IEC 60695-11-10, -20
0.0295 in
 
 
0.118 in
 
 
Related Terminology
This supplier and product may also be known by these terms: Derlin
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, High Viscosity, Low Friction, Good Creep Resistance, Creep Resistant, High Impact Resistance, Ultrasonic Weldable.
Uses
Uses may also be described by the following terms: Engineering Parts.
Available Documents
Processing - Injection Molding (English)
Typical Processing for DuPont Engineering Polymers (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time - Desiccant Dryer
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Melt Temperature, Optimum - Injection Molding
°F
 
Mold Temperature
°F
 
Mold Temperature, Optimum - Injection Molding
°F
 
Drying Recommended
 
 
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.