| Product Description | |
|
20% Talc Reinforced, Polypropylene, Grey
|
|
| General | |
|
Material Status
|
|
|
Availability
|
|
|
Filler / Reinforcement
|
|
|
Appearance
|
|
|
Processing Method
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength 2
|
|
psi
|
ASTM D638 |
|
Flexural Modulus - Tangent
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256 |
|
Gardner Impact
|
|
in·lb
|
ASTM D5420 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore D)
|
|
|
ASTM D2240 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load
|
ASTM D648 | ||
|
66 psi, Unannealed
|
|
°F
|
|
|
264 psi, Unannealed
|
|
°F
|
|
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Reinforcement Content
|
|
%
|
ASTM D5630 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: RheTech Polypropylene T20P100-248, RheTech Polypropylene T20P100248, RheTech Polypropylene , RheTechPolypropyleneT20P100248, RheTechPolypropylene, T 20 P 100, PolypropyleneT 20 P 100 248, PolypropyleneT 20 P 100, T20P100, PolypropyleneT20P100-248, PolypropyleneT20P100248, PolypropyleneT20P100:248, PolypropyleneT20P100/248, PolypropyleneT20P100+248, PolypropyleneT20P100_248, PolypropyleneT20P100 248, PolypropyleneT20, PolypropyleneT20P100, T 20 P 100 248, T20P100-248, T20P100248, T20P100:248, T20P100/248, T20P100+248, T20P100_248, T20P100 248, T20, 20P, P100, 100248, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, RheTech, PolypropyleneUnspecified, PPUnspecified, 20T, 20PolypropyleneT
|
|||
| Generic Name | |||
|
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Drying Temperature
|
|
°F
|
|
|
Drying Time
|
|
hr
|
|
|
Suggested Max Moisture
|
|
%
|
|
|
Rear Temperature
|
|
°F
|
|
|
Middle Temperature
|
|
°F
|
|
|
Front Temperature
|
|
°F
|
|
|
Nozzle Temperature
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
|
Injection Pressure
|
|
psi
|
|
|
Holding Pressure
|
|
psi
|
|
|
Back Pressure
|
|
psi
|
|
|
Clamp Tonnage
|
|
tons/in²
|
|
| Injection Notes | |||
|
Cycle Time: Wall Thickness Dependant
Drying is Optional Injection Speed: Variable - Application Dependant Screw recovery 3 seconds before mold opens |
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 22.0 in/min |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |