IDES Prospector Already have an account? Login Here

Amodel® AT-1002 HS Data Sheet

Polyphthalamide

Supplied by Solvay Specialty Polymers

Home > Plastics > Amodel® > Amodel® AT-1002 HS Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
Amodel AT-1002 HS is a neat, toughened, heat stabilized polyphthalamide (PPA) resin that offers superior retention of properties after humid thermal aging; high impact at low temperature and better mechanical properties than many unreinforced thermoplastic polyester and nylon resins.

This material was specifically designed for automotive electrical/electronic applications such as connectors, sockets and sensors.

  • Black: AT-1002 HS BK 718
  • Natural: AT-1002 HS NT
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • Heat Stabilizer
  • Impact Modifier
  • Lubricant
  • Mold Release
  
Features 
  • Ductile
  • Good Chemical Resistance
  • Heat Stabilized
  • Hot Water Moldability
  • Impact Modified
  • Low Temperature Impact Resistance
  • Low Warpage
  • Lubricated
Uses 
  • Automotive Applications
  • Automotive Electronics
  • Automotive Under the Hood
  • Fuel Lines
  • Machine/Mechanical Parts
  • Metal Replacement
  • Valves/Valve Parts
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Black
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Water-Heated Mold Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183/A
Molding Shrinkage
       ASTM D955
Flow
--
in/in
  
Across Flow
--
in/in
  
Water Absorption (24 hr)
--
%
 ASTM D570
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
        
--
psi
 ASTM D638
73°F
--
psi
 ISO 527-2
212°F
--
psi
 ISO 527-2
Tensile Stress
        
Yield, 73°F
--
psi
 ISO 527-2
Yield, 212°F
--
psi
 ISO 527-2
Break, 73°F
--
psi
 ISO 527-2
--
psi
 ASTM D638
Tensile Strain
        
Yield, 73°F
--
%
 ISO 527-2
Yield, 212°F
--
%
 ISO 527-2
Break 2
%
 ASTM D638
Break, 73°F
--
%
 ISO 527-2
Flexural Modulus
        
--
psi
 ASTM D790
73°F
--
psi
 ISO 178
212°F
--
psi
 ISO 178
Flexural Strength
        
--
psi
 ASTM D790
73°F
--
psi
 ISO 178
212°F
--
psi
 ISO 178
Shear Strength
psi
 ASTM D732
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
--
 
 ISO 179/1eU
Notched Izod Impact
        
--
ft·lb/in
 ASTM D256
73°F
--
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength (73°F)
--
 
 ISO 180/1U
Instrumented Dart Impact (Total Energy)
in·lb
 ASTM D3763
Penetration Impact 3
lbf
 ASTM D3763
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
        
66 psi, Annealed
--
°F
 ASTM D648
264 psi, Unannealed
--
°F
 ISO 75-2/Af
264 psi, Annealed
--
°F
 ASTM D648
Melting Temperature
--
°F
 ISO 11357-3, ASTM D3418
CLTE
       ASTM E831
Flow: 32 to 212°F
--
in/in/°F
  
Flow: 212 to 392°F
--
in/in/°F
  
Transverse: 32 to 212°F
--
in/in/°F
  
Transverse: 212 to 392°F
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
       ASTM D150
60 Hz
 
  
1 MHz
 
  
Dissipation Factor
       ASTM D150
60 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 ASTM D3638
High Voltage Arc Tracking Rate (HVTR)
in/min
 UL 746
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating 4
--
 
 UL 94
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® AT-1002 HS, Amodel AT1002 HS, Amodel® , Amodel, AmodelAT1002HS, AT, AT-1002 HS, AT1002 HS, AT:1002 HS, AT/1002 HS, AT+1002 HS, AT_1002 HS, AT 1002 HS, AT1002, 1002HS, AT1002HS, AT_1002HS, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 1002AT
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Chemical Resistance, Chemical Resistant, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Hot Water Moldable, Low Warpage, Low Warp.
Uses
Dry
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts, Automotive Applications, Automotive Sector, Valves, Valve Parts.
Automotive Specifications
Dry
This plastic material has approval for 5 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), DELPHI (3), GM (1).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® AT-1002 HS, Amodel AT1002 HS, Amodel® , Amodel, AmodelAT1002HS, AT, AT-1002 HS, AT1002 HS, AT:1002 HS, AT/1002 HS, AT+1002 HS, AT_1002 HS, AT 1002 HS, AT1002, 1002HS, AT1002HS, AT_1002HS, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 1002AT
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Screw Speed
rpm
  
Screw Compression Ratio
 
  
Injection Notes
Injection Rate: 1 to 3 in/sec
Holding Pressure: 50% of injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV
3Maximum Load
4This rating is not intended to reflect hazards presented by this or any other material under
actual fire conditions.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.