Home > Plastics > Materials > POLYFORT® > POLYFORT® FPP 1080 - Datasheet

POLYFORT® FPP 1080 Data Sheet

Polypropylene

20% Glass Fiber

Supplied by A. Schulman Inc.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
PP 20% Glass Fiber
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber, 20% Filler by Weight
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Additional Information
Nominal Value
Unit
Test Method
Filler Content
%
ASTM D5630
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), CHRYSLER (1), TOYOTA (1).
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.