Home > Plastics > Materials > Paxon™ > Paxon™ BA50-120 - Datasheet

Paxon™ BA50-120 Data Sheet

High Density Polyethylene (MMW) Resin

Supplied by ExxonMobil Chemical

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
BA50-120 is a high molecular weight, high density polyethylene copolymer. This resin has superior stress crack resistance, high impact strength and good rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
 
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D4883
Melt Mass-Flow Rate (MFR)
    ASTM D1238
190°C/2.16 kg
g/10 min
 
190°C/21.6 kg
g/10 min
 
Environmental Stress-Cracking Resistance (100% Igepal)
hr
ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength (73°F)
ft·lb/in²
ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ASTM D1525
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.