| Product Description | ||||
|
High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour black.
Applications for higher strength and stiffness in a static or dynamic system. Excellent wear resistance, low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Features
|
|
|||
|
Agency Ratings
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Molding Shrinkage
|
No Standard | ||
|
Across Flow: 338°F, 0.118 in
|
|
%
|
|
|
Flow: 338°F, 0.118 in
|
|
%
|
|
|
Water Absorption
|
ISO 62 | ||
|
73°F, 24 hr, 0.126 in
|
|
%
|
|
|
Equilibrium, 73°F, 0.126 in, 50% RH
|
|
%
|
|
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus (73°F)
|
|
psi
|
ISO 527-2 |
|
Tensile Stress
|
ISO 527-2 | ||
|
Break, 73°F
|
|
psi
|
|
|
Break, 257°F
|
|
psi
|
|
|
Break, 347°F
|
|
psi
|
|
|
Break, 527°F
|
|
psi
|
|
|
Tensile Strain (Break, 73°F)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus (73°F)
|
|
psi
|
ISO 178 |
|
Flexural Strength
|
ISO 178 | ||
|
73°F
|
|
psi
|
|
|
257°F
|
|
psi
|
|
|
347°F
|
|
psi
|
|
|
527°F
|
|
psi
|
|
|
Compressive Stress
|
ISO 604 | ||
|
73°F
|
|
psi
|
|
|
248°F
|
|
psi
|
|
|
392°F
|
|
psi
|
|
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 179/1eA |
|
Charpy Unnotched Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 179/1U |
|
Notched Izod Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 180/A |
|
Unnotched Izod Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 180 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Shore Hardness (Shore D, 73°F)
|
|
|
ISO 868 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
°F
|
ISO 75-2/A |
|
Glass Transition Temperature
|
|
°F
|
ISO 11357-2 |
|
Melting Temperature
|
|
°F
|
ISO 11357-3 |
|
CLTE
|
ISO 11359-2 | ||
|
Flow: < 289°F
|
|
in/in/°F
|
|
|
Flow: > 289°F
|
|
in/in/°F
|
|
|
Transverse: < 289°F
|
|
in/in/°F
|
|
|
Transverse: > 289°F
|
|
in/in/°F
|
|
|
Specific Heat (73°F)
|
|
Btu/lb/°F
|
DSC |
|
Thermal Conductivity (73°F)
|
|
Btu·in/hr/ft²/°F
|
ISO 22007-4 |
|
RTI Imp
|
|
°F
|
UL 746 |
|
RTI Str
|
|
°F
|
UL 746 |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Volume Resistivity 2 (73°F)
|
|
ohm·cm
|
ASTM D4496 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Glow Wire Flammability Index (0.0787 in)
|
|
°F
|
IEC 60695-2-12 |
|
Toxicity
|
NES 713 | ||
|
CO Content
|
|
|
|
|
CO2 Content
|
|
|
|
|
Total Gases
|
|
|
|
| Fill Analysis |
Nominal Value
|
Unit
|
Test Method
|
|
Melt Viscosity (752°F)
|
|
Pa·s
|
ISO 11443 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® PEEK 450CA30, VICTREX PEEK 450CA30, VICTREX® PEEK , VICTREX PEEK, VICTREXPEEK450CA30, VICTREXPEEK, PEEK 450 CA 30, PEEK450CA30, PEEK450, PEEK, 450 CA 30, 450CA30, 450CA, CA30, Polyetheretherketone, Polyaryletherketone, PAEK, Victrex, CA450, 450PEEK
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant, High Stiffness, Low Friction, Good Flow, High Strength, Semi-Crystalline.
|
|||
| Agency Ratings | |||
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): Rolls Royce (1), FDA (1).
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Drying Temperature
|
|
°F
|
|
|
Drying Time
|
|
hr
|
|
|
Hopper Temperature
|
|
°F
|
|
|
Rear Temperature
|
|
°F
|
|
|
Middle Temperature
|
|
°F
|
|
|
Front Temperature
|
|
°F
|
|
|
Nozzle Temperature
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
| Injection Notes | |||
|
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness |
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 21V |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |