Home > Plastics > Materials > Propilco PP > Propilco PP 40H92N - Datasheet

Propilco PP 40H92N Datasheet

Polypropylene Homopolymer

Supplied by PROPILCO S.A.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Propilco PP 40H92N is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by injection molding and is available in Latin America. Applications of Propilco PP 40H92N include food contact applications and containers.

Characteristics include:
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Processability
  • High Flow
  • High Stiffness
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
Additive 
  • Nucleating Agent
Features 
  • Fast Molding Cycle
  • Food Contact Acceptable
  • General Purpose
  • Good Moldability
  • High Flow
  • High Stiffness
  • Homopolymer
  • Nucleated
Uses 
  • Containers
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) 2 (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Yield, 0.126 in, Injection Molded)
psi
ASTM D638
Tensile Elongation 3 (Yield, 0.126 in, Injection Molded)
%
ASTM D638
Flexural Modulus - 1% Secant  4 (0.126 in, Injection Molded)
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
ASTM D256A
Features
Features may also be described by the following terms: High Stiffness, Good Moldability, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Flow, High Melt, High MFI.
Agency Ratings
This plastic material has 13 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (9), FDA (4).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure B
3Type I, 2.0 in/min
4Type I, 0.051 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.