| Product Description | ||||
|
PULSE 2000 EZ Engineering Resin is designed to provide top performance in tough applications, from single piece items to intricate components. Ideal for energy management solutions, PULSE 2000 EZ can withstand high and low temperature extremes and rapid, repeated temperature fluctuations.
Applications:
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Automotive Specifications
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|||
|
--
|
|
g/cm³
|
ASTM D792, ISO 1183/B |
|
--
|
|
lb/in³
|
ISO 1183 2 |
|
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
|
|
g/10 min
|
ASTM D1238, ISO 1133 |
|
Melt volume-flow rate (230°C/3.8 kg)
|
|
in³/10min
|
ISO 1133 2 |
|
Molding Shrinkage
|
|
%
|
ISO 294-4 |
|
Water Absorption (73°F, 24 hr)
|
|
%
|
ASTM D570, ISO 62 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus
|
|||
|
0.157 in, Injection Molded
|
|
psi
|
ISO 527-2 |
|
--
|
|
psi
|
ISO 527-2 2 |
|
Tensile Stress
|
|||
|
Yield 3
|
|
psi
|
ASTM D638 |
|
Yield
|
|
psi
|
ISO 527-2/50 |
|
Yield
|
|
psi
|
ISO 527-2 2 |
|
Break 3
|
|
psi
|
ASTM D638 |
|
Break
|
|
psi
|
ISO 527-2/50 |
|
Tensile Strain
|
|||
|
Yield
|
|
%
|
ISO 527-2/50 |
|
Yield
|
|
%
|
ISO 527-2 2 |
|
Break
|
|
%
|
ASTM D638 |
|
Break
|
|
%
|
ISO 527-2/50 |
|
Nominal strain at break
|
|
%
|
ISO 527-2 2 |
|
Flexural Modulus
|
|||
|
-- 4
|
|
psi
|
ASTM D790 |
|
-- 5
|
|
psi
|
ISO 178 |
|
Flexural Strength 5
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy notched impact strength
|
ISO 179/1eA 2 | ||
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Charpy impact strength
|
ISO 179/1eU 2 | ||
|
-22°F
|
|
|
|
|
73°F
|
|
|
|
|
Notched Izod Impact Strength
|
|||
|
-22°F
|
|
ft·lb/in²
|
ASTM D256 |
|
-22°F
|
|
ft·lb/in²
|
ISO 180/A |
|
73°F
|
|
ft·lb/in²
|
ASTM D256 |
|
73°F
|
|
ft·lb/in²
|
ISO 180/A |
|
Instrumented Dart Impact 6
|
ASTM D3763 | ||
|
73°F, Total Energy
|
|
in·lb
|
|
|
73°F, Peak Energy
|
|
in·lb
|
|
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature
|
|||
|
66 psi, Unannealed
|
|
°F
|
ASTM D648 |
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
66 psi
|
|
°F
|
ISO 75-2 2 |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
264 psi
|
|
°F
|
ISO 75-2 2 |
|
Vicat Softening Temperature
|
|||
|
--
|
|
°F
|
ISO 306/A120 |
|
--
|
|
°F
|
ISO 306/B50 |
|
50°C/h, B (50N)
|
|
°F
|
ISO 306 2 |
|
CLTE - Flow
|
|
in/in/°F
|
ISO 11359-2 2 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Burning Rate 7
|
|
in/min
|
FMVSS 302 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PULSE™ 2000 EZ, PULSE 2000 EZ, PULSE™ , PULSE, PULSE2000EZ, 2000 EZ, 2000EZ, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, EZ2000
|
|||
| Automotive Specifications | |||
|
This plastic material has approval for 10 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (5), GM (1), TOYOTA (2), FORD (2).
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 32.0 in/min |
| 40.051 in/min |
| 50.079 in/min |
| 67.22 ft/sec |
| 7This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |