| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Molding Shrinkage
|
|
%
|
ISO 294-4 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress (Yield)
|
|
psi
|
ISO 527-2 |
|
Flexural Modulus
|
|
psi
|
ISO 178 |
|
Flexural Strength
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 180 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Rockwell Hardness (R-Scale)
|
|
|
ISO 2039-2 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load (264 psi, Unannealed)
|
|
°F
|
ASTM D648 |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Surface Resistivity
|
|
ohm
|
ASTM D257 |
|
Volume Resistivity
|
|
ohm·cm
|
ASTM D257 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Flame Rating (0.0591 in)
|
|
|
UL 94 |
| Additional Information | |||
|
The value listed as Mold Shrinkage, ISO 294, was tested in accordance with ISO 2577.
|
|||
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Veroplas E11, Veroplas , VeroplasE11, E 11, E11, Acrylonitrile Butadiene Styrene, ABS, PlastxWorld, AcrylonitrileButadieneStyrene, 11E
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |