Home > Plastics > Materials > Leona™ > Leona™ 1402SH - Datasheet

Leona™ 1402SH Data Sheet

Polyamide 66

Supplied by Asahi Kasei Chemicals Corporation

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Leona™ 1402SH is a Polyamide 66 (Nylon 66) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, or North America.

Characteristics include:
  • Flame Retardant/Flame Rated
  • Heat Stabilizer
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
 
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
       
--
--
 
ASTM D792
--
--
g/cm³
ISO 1183
Molding Shrinkage - Flow
--
%
Internal Method
Water Absorption
       
Equilibrium
--
%
ASTM D570
Equilibrium, 73°F, 50% RH
--
%
ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress
       
Yield, 73°F
psi
ISO 527-2
--
psi
ASTM D638
Tensile Strain
       
Yield, 73°F
%
ISO 527-2
Break
%
ASTM D638
Break, 73°F
--
%
ISO 527-2
Flexural Modulus
       
--
psi
ASTM D790
73°F
psi
ISO 178
Flexural Strength
       
--
psi
ASTM D790
73°F
psi
ISO 178
Taber Abrasion Resistance
--
mg
ASTM D1044
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength
 
ISO 179
Notched Izod Impact
ft·lb/in
ASTM D256
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness
      ASTM D785, ISO 2039-2
M-Scale
 
 
R-Scale
 
 
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
       
66 psi, Unannealed
--
°F
ASTM D648
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ASTM D648
264 psi, Unannealed
--
°F
ISO 75-2/A
CLTE - Flow
--
in/in/°F
ASTM D696, ISO 11359-2
Specific Heat
--
Btu/lb/°F
 
Thermal Conductivity
--
Btu·in/hr/ft²/°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
--
ohm
IEC 60093
Volume Resistivity (73°F)
--
ohm·cm
IEC 60093
Electric Strength
--
V/mil
IEC 60243-1
Comparative Tracking Index (0.118 in)
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating
      UL 94
0.0313 in
--
 
 
0.0625 in
--
 
 
Related Terminology
Dry
This supplier and product may also be known by these terms: Thermofil, Asahi Thermofil
Conditioned
This supplier and product may also be known by these terms: Thermofil, Asahi Thermofil
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Available Documents
Dry
Technical Datasheet (English)
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.