Home > Plastics > Materials > VALOX™ > VALOX™ 780 resin - Datasheet

VALOX™ 780 resin Datasheet

Polybutylene Terephthalate

40% Glass\Mineral

Supplied by SABIC Innovative Plastics

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
VALOX™ 
780 resin
40% gl/min, UL94 V-0 rated. Nonblooming flame retardant. Circuit breaker handles/housings, motor coil housings.
VALOX™ 
780 resin
40% gl/min, UL94 V-0 rated. Nonblooming flame retardant. Circuit breaker handles/housings, motor coil housings.
General VALOX™ 
780 resin
VALOX™ 
780 resin
Material Status 
  • Commercial: Active
  • Commercial: Active
Availability 
  • North America
  • Asia Pacific
Filler / Reinforcement 
  • Glass\Mineral, 40% Filler by Weight
  • Glass\Mineral, 40% Filler by Weight
Additive 
  • Flame Retardant
  • Flame Retardant
Features 
  • Flame Retardant
  • Non-Blooming
  • Flame Retardant
  • Non-Blooming
Uses 
  • Housings
  • Housings
Processing Method 
  • Injection Molding
  • Injection Molding
Multi-Point Data 
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Creep (ASTM D2990)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
--
Physical VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Specific Gravity
 
ASTM D792
Specific Volume
in³/lb
ASTM D792
Molding Shrinkage
      Internal Method
Flow  2
in/in
 
Flow  3
in/in
 
Across Flow  4
in/in
 
Across Flow  3
in/in
 
Water Absorption (24 hr)
%
ASTM D570
Mechanical VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Tensile Strength 5 (Break)
psi
ASTM D638
Flexural Modulus 6 (1,97 in Span)
psi
ASTM D790
Flexural Strength 6 (Break, 1,97 in Span)
psi
ASTM D790
Impact VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
ASTM D4812
Hardness VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Deflection Temperature Under Load
      ASTM D648
66 psi, Unannealed, 0,252 in
°F
 
264 psi, Unannealed, 0,252 in
°F
 
CLTE - Flow
      ASTM E831
-40 to 104°F
in/in/°F
 
140 to 280°F
in/in/°F
 
RTI Elec
°F
UL 746
RTI Imp
°F
UL 746
RTI Str
°F
UL 746
Electrical VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Strength
      ASTM D149
0,0630 in, in Oil
V/mil
 
0,126 in, in Air
V/mil
 
Dielectric Constant
      ASTM D150
100 Hz
 
 
1 MHz
 
 
Dissipation Factor
      ASTM D150
100 Hz
 
 
1 MHz
 
 
Arc Resistance 7
 
ASTM D495
Comparative Tracking Index (CTI)
 
UL 746
High Amp Arc Ignition (HAI)
 
UL 746
High Voltage Arc Tracking Rate (HVTR)
 
UL 746
Hot-wire Ignition (HWI)
 
UL 746
Flammability VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
Test Method
Flame Rating (0,0320 in)
 
UL 94
Related Terminology
VALOX™ 
780 resin
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland
VALOX™ 
780 resin
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics
Features
VALOX™ 
780 resin
Features may also be described by the following terms: Non-Blooming, Non Blooming.
VALOX™ 
780 resin
Features may also be described by the following terms: Non-Blooming, Non Blooming.
Uses
VALOX™ 
780 resin
Uses may also be described by the following terms: Housings, Housing.
VALOX™ 
780 resin
Uses may also be described by the following terms: Housings, Housing.
Available Documents
VALOX™ 
780 resin
Technical Datasheet
VALOX™ 
780 resin
Technical Datasheet
Injection VALOX™ 
780 resin
VALOX™ 
780 resin
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Drying Time, Maximum
hr
 
Suggested Max Moisture
%
 
Suggested Shot Size
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Vent Depth
in
 
Notes
1Typical properties: these are not to be construed as specifications.
23.2 to 4.6 mm
31.5 to 3.2 mm
43.2-4.6 mm
5Type I, 0,20 in/min
60,051 in/min
7Tungsten Electrode
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.