Home > Plastics > Materials > VALOX™ > VALOX™ 357 resin - Datasheet

VALOX™ 357 resin Data Sheet

Polycarbonate + PBT

Supplied by SABIC Innovative Plastics

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
VALOX™ 
357 resin
PC/PBT, Unreinforced, impact modified, UL94V-0 rated. Applications like bobbins, switches and enclosures.
VALOX™ 
357 resin
PBT + PC, Unreinforced, impact modified, UL94V-0 rated. Applications like bobbins, switches and enclosures.
General VALOX™ 
357 resin
VALOX™ 
357 resin
Material Status 
  • Commercial: Active
  • Commercial: Active
Availability 
  • North America
  • Asia Pacific
Additive 
  • Impact Modifier
  • Impact Modifier
Features 
  • Impact Modified
  • Impact Modified
Uses 
  • Bobbins
  • Housings
  • Switches
  • Switches
Automotive Specifications 
--
Processing Method 
  • Injection Molding
  • Injection Molding
Multi-Point Data 
  • Compressive Stress vs. Strain (ASTM D695)
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Creep (ASTM D2990)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
--
Physical VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Specific Gravity
       
--
 
ASTM D792
--
g/cm³
ISO 1183
Specific Volume
in³/lb
ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)
g/10 min
ASTM D1238
Melt Volume-Flow Rate (MVR) (250°C/5.0 kg)
in³/10min
ISO 1133
Molding Shrinkage
      Internal Method
Flow  2
in/in
 
Flow  3
in/in
 
Flow : 0.126 in
in/in
 
Across Flow  2
in/in
 
Across Flow  3
in/in
 
Water Absorption
       
24 hr
%
ASTM D570
Saturation, 73°F
%
ISO 62
Equilibrium, 73°F, 50% RH
%
ISO 62
Outdoor Suitability
 
UL 746C
Mechanical VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Tensile Modulus
       
-- 4
psi
ASTM D638
--
--
psi
ISO 527-2/1
Tensile Strength
       
Yield 5
psi
ASTM D638
Yield
--
psi
ISO 527-2/50
Break 5
psi
ASTM D638
Break
--
psi
ISO 527-2/50
Tensile Elongation
       
Yield 5
%
ASTM D638
Yield
--
%
ISO 527-2/50
Break 5
%
ASTM D638
Break
--
%
ISO 527-2/50
Flexural Modulus
       
1.97 in Span 6
psi
ASTM D790
-- 7
--
psi
ISO 178
Flexural Strength
       
-- 7, 8
--
psi
ISO 178
Yield, 1.97 in Span 6
psi
ASTM D790
Break, 1.97 in Span 6
psi
ASTM D790
Impact VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Charpy Notched Impact Strength 9 (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact
       
-22°F
ft·lb/in
ASTM D256
73°F
ft·lb/in
ASTM D256
-22°F 10
ft·lb/in²
ISO 180/1A
73°F 10
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact (73°F)
 
ASTM D4812
Instrumented Dart Impact (73°F, Total Energy)
in·lb
ASTM D3763
Gardner Impact
      ASTM D3029
73°F 11
in·lb
 
73°F
in·lb
 
Hardness VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Deflection Temperature Under Load
       
66 psi, Unannealed, 0.126 in
--
°F
ASTM D648
66 psi, Unannealed, 0.252 in
°F
ASTM D648
264 psi, Unannealed, 0.126 in
--
°F
ASTM D648
264 psi, Unannealed, 0.252 in
°F
ASTM D648
264 psi, Unannealed, 2.52 in Span 12
°F
ISO 75-2/Af
Vicat Softening Temperature
       
--
°F
ASTM D1525 13
--
°F
ISO 306/B50
--
°F
ISO 306/B120
Ball Pressure Test 14 (257°F)
--
 
IEC 60695-10-2
CLTE
       
Flow : -40 to 104°F
in/in/°F
ASTM E831
Flow : 140 to 280°F
in/in/°F
ASTM E831
Flow : -40 to 104°F
in/in/°F
ISO 11359-2
Transverse : -40 to 104°F
in/in/°F
ASTM E831, ISO 11359-2
RTI Elec
°F
UL 746
RTI Imp
°F
UL 746
RTI Str
°F
UL 746
Electrical VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Strength
      ASTM D149
0.0630 in, in Oil
V/mil
 
0.126 in, in Air
V/mil
 
0.126 in, in Oil
V/mil
 
Dielectric Constant
      ASTM D150
100 Hz
 
 
1 MHz
 
 
Dissipation Factor
      ASTM D150
100 Hz
 
 
1 MHz
 
 
Arc Resistance 15
 
ASTM D495
Comparative Tracking Index (CTI)
 
UL 746
High Amp Arc Ignition (HAI)
 
UL 746
High Voltage Arc Tracking Rate (HVTR)
 
UL 746
Hot-wire Ignition (HWI)
 
UL 746
Flammability VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
Test Method
Flame Rating
      UL 94
0.0181 in
 
 
0.0248 in
 
 
0.118 in
 
 
Glow Wire Flammability Index (0.0394 in)
--
°F
IEC 60695-2-12
Glow Wire Ignition Temperature
      IEC 60695-2-13
0.0394 in
--
°F
 
0.0787 in
--
°F
 
0.118 in
--
°F
 
Oxygen Index
%
ASTM D2863
Related Terminology
VALOX™ 
357 resin
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland
VALOX™ 
357 resin
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics
Uses
VALOX™ 
357 resin
Uses may also be described by the following terms: Housings, Housing.
Automotive Specifications
VALOX™ 
357 resin
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).
Available Documents
VALOX™ 
357 resin
Technical Datasheet
VALOX™ 
357 resin
Technical Datasheet
Injection VALOX™ 
357 resin
VALOX™ 
357 resin
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Drying Time, Maximum
hr
 
Suggested Max Moisture
%
 
Suggested Shot Size
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Vent Depth
in
 
Notes
1Typical properties: these are not to be construed as specifications.
22.3 to 4.6 mm
30.75 to 2.3 mm
40.20 in/min
5Type I, 2.0 in/min
60.051 in/min
70.079 in/min
8Yield
980*10*4 sp=62mm
1080*10*4
11Modified
1280*10*4 mm
13Rate B (120°C/h), Loading 2 (50 N)
14by VDE
15Tungsten Electrode
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.