Home > Plastics > Materials > Amilan® > Amilan® CM3006G-30 - Datasheet

Amilan® CM3006G-30 Data Sheet

Polyamide 66

30% Glass Fiber

Supplied by Toray Resin Company

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Amilan® CM3006G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America.

Characteristics include:
  • Flame Retardant/Flame Rated
  • Heat Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Features 
  • High Heat Resistance
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Molding Shrinkage
      Internal Method
Across Flow : 0,118 in
--
%
 
Flow : 0,118 in
--
%
 
Water Absorption
      ISO 62
73°F, 24 hr
--
%
 
Saturation, 73°F
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Stress
      ISO 527-2
Yield, -40°F
psi
 
Yield, 73°F
psi
 
Yield, 176°F
psi
 
Tensile Strain
      ISO 527-2
Break, -40°F
%
 
Break, 73°F
%
 
Break, 176°F
%
 
Flexural Modulus
      ISO 178
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Flexural Strength
      ISO 178
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Compressive Stress
      ISO 604
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Shear Strength (73°F)
psi
ASTM D732
Coefficient of Friction
       
-- 2
--
 
 
-- 3
--
 
 
Taber Abrasion Resistance (1000 Cycles)
--
mg
 
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179
-40°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
      ISO 179
-40°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness
      ISO 2039-2
M-Scale, 73°F
--
 
 
R-Scale, 73°F
--
 
 
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
       
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ISO 75-2/A
Melting Temperature
--
°F
DSC
CLTE - Flow
--
in/in/°F
ISO 11359-2
Specific Heat
--
Btu/lb/°F
 
Thermal Conductivity
--
Btu·in/hr/ft²/°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
ohm·cm
IEC 60093
Electric Strength (0,118 in)
V/mil
IEC 60243-1
Dielectric Constant 4
      IEC 60250
73°F, 50 Hz
 
 
73°F, 1 kHz
 
 
73°F, 1 MHz
 
 
Dissipation Factor 4
      IEC 60250
73°F, 50 Hz
 
 
73°F, 1 kHz
 
 
73°F, 1 MHz
 
 
Arc Resistance 5
sec
UL 746
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating (0,0313 in)
--
 
UL 94
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: High Heat Resistance.
Available Documents
Dry
Technical Datasheet (Japanese)
Notes
1Typical properties: these are not to be construed as specifications.
2vs. steel, non-lubricated, Suzuki formula
3vs. steel, oil lubrication, Suzuki formula
460% RH
5Tungsten Electrode
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.