Home > Plastics > Materials > Toyolac® > Toyolac® 700-314 - Datasheet

Toyolac® 700-314 Data Sheet

Acrylonitrile Butadiene Styrene

Supplied by Toray Resin Company

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Toyolac® 700-314 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame retardant/flame rated.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
UL File Number 
  • E41797
Part Marking Code 
  • >ABS<
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
-- 2
 
ASTM D792
73°F
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ISO 1133
Molding Shrinkage (73°F)
%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     
Yield, 73°F
psi
ISO 527-2
73°F
psi
ASTM D638
Tensile Elongation
     
Break, 73°F
%
ASTM D638
Break, 73°F
%
ISO 527-2
Flexural Modulus
     
73°F
psi
ASTM D790
73°F
psi
ISO 178
Flexural Strength
     
73°F
psi
ASTM D790
73°F
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179
Notched Izod Impact
    ASTM D256
-22°F, 0,126 in
ft·lb/in
 
-22°F, 0,500 in
ft·lb/in
 
32°F, 0,126 in
ft·lb/in
 
32°F, 0,500 in
ft·lb/in
 
73°F, 0,126 in
ft·lb/in
 
73°F, 0,500 in
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 73°F)
 
ASTM D785, ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
264 psi, Unannealed, 0,252 in
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature 3
°F
 
CLTE - Flow
in/in/°F
ASTM D696
Ball Pressure Test
°F
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Available Documents
Technical Datasheet (Japanese)
Notes
1Typical properties: these are not to be construed as specifications.
223°C
30.1 mm
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.