Home > Plastics > Materials > Vandar® > Vandar® 6000 - Datasheet

Vandar® 6000 Data Sheet

Polybutylene Terephthalate

Supplied by Celanese Corporation

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Vandar 6000 is a toughened polyester alloy with excellent cold temperature impact resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Low Temperature Impact Resistance
RoHS Compliance 
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Molding Shrinkage
     
Flow
in/in
ASTM D955
Across Flow
%
ISO 294-4
Flow
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Strength
     
Yield, 73°F
psi
ASTM D638
Yield
psi
ISO 527-2/1A/50
Break, 73°F
psi
ASTM D638
50% Strain
psi
ISO 527-2/1A/50
Tensile Strain
     
Yield
%
ISO 527-2/1A/50
Break, 73°F
%
ASTM D638
Nominal Tensile Strain at Break
%
ISO 527-2/1A/50
Flexural Modulus (73°F)
psi
ISO 178
Flexural Strength (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F, Partial Break)
ft·lb/in²
ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
66 psi, Annealed
°F
ASTM D648
264 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
Glass Transition Temperature 2
°F
ISO 11357-2
CLTE - Flow
in/in/°F
ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Available Documents
Technical Datasheet - ASTM (English)
Technical Datasheet - ISO (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Suggested Max Regrind
%
 
Hopper Temperature
°F
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Back Pressure
psi
 
Injection Notes
Manifold Temperature: 260 to 280°C
Zone 4 Temperature: 255 to 265°C
Feed Temperature: 240 to 255°C
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.