Home > Plastics > Materials > TRILAC® > TRILAC® ABS-HF5500 - Datasheet

TRILAC® ABS-HF5500 Data Sheet

Acrylonitrile Butadiene Styrene

Supplied by Polymer Technology and Services, LLC

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
TRILAC® ABS-HF5500 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in North America.

Characteristics include:
  • Flame Retardant/Flame Rated
  • High Flow
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Flow
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength (Yield)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
0,125 in
ft·lb/in
 
0,250 in
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0,0626 in
 
 
0,125 in
 
 
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Rate
 
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.