Home > Plastics > Materials > Delrin® > Delrin® 510GR NC000 - Datasheet

Delrin® 510GR NC000 Data Sheet

ACETAL RESIN

10% Glass Fiber

Supplied by DuPont Performance Polymers

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Delrin® 510GR is a 10% glass reinforced acetal homopolymer for injection molding. It has high strength, stiffness, and high deflection temperature and excellent creep resistance.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 10% Filler by Weight
Features 
  • Fatigue Resistant
  • Good Creep Resistance
  • Good Stiffness
  • High Strength
  • Homopolymer
  • Medium Viscosity
Uses 
  • Engineering Parts
  • Metal Replacement
 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)
  • >POM-GF10<
Resin ID (ISO 1043)
  • POM-GF10
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
ISO 1133
Molding Shrinkage
    ISO 294-4
Across Flow : 0.0787 in
%
 
Flow : 0.0787 in
%
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress (Break, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Tensile Creep Modulus
    ISO 899-1
1 hr
psi
 
1000 hr
psi
 
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Melting Temperature 3
°F
ISO 11357-3
CLTE
    ISO 11359-2
Flow : 73 to 131°F
in/in/°F
 
Transverse : 73 to 131°F
in/in/°F
 
RTI Elec (0.0295 in)
°F
UL 746
RTI Imp (0.0295 in)
°F
UL 746
RTI Str (0.0295 in)
°F
UL 746
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
IEC 60093
Relative Permittivity
    IEC 60250
73°F, 100 Hz
 
 
73°F, 1 MHz
 
 
Dissipation Factor (73°F, 1 MHz)
 
IEC 60250
Comparative Tracking Index
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.0295 in)
 
UL 94, IEC 60695-11-10, -20
Oxygen Index
%
ISO 4589-2
Related Terminology
This supplier and product may also be known by these terms: Derlin
Features
Features may also be described by the following terms: Good Creep Resistance, Creep Resistant, Good Stiffness, High Strength, Medium Viscosity.
Uses
Uses may also be described by the following terms: Engineering Parts.
Available Documents
Processing - Injection Molding (English)
Typical Processing for DuPont Engineering Polymers (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time - Desiccant Dryer
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Melt Temperature, Optimum - Injection Molding
°F
 
Mold Temperature
°F
 
Mold Temperature, Optimum - Injection Molding
°F
 
Drying Recommended
 
 
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
310°C/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.