Home > Plastics > Materials > Starex > Starex VH-0800 - Datasheet

Starex VH-0800 Data Sheet

Acrylonitrile Butadiene Styrene

Supplied by Samsung, a division of Cheil Industries

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Flame-retardant ABS material with the characteristic of high flow that can applied to the exterior material of OA devices such as monitor, printer, fax machine, duplicator etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • High Flow
 
Uses 
  • Printer Parts
Physical
Nominal Value
Unit
Test Method
Specific Gravity (Natural)
 
ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow (0.126 in)
in/in
ASTM D955
Ash Content
%
ASTM D5630
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Flexural Modulus 3
psi
ASTM D790
Flexural Strength 3
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.252 in)
°F
ASTM D648
Vicat Softening Temperature
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0.0591 in
 
 
0.118 in
 
 
0.236 in
 
 
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Available Documents
Processing (English)
Technical Datasheet - ASTM (English)
Injection
Nominal Value
Unit
 
Drying Temperature
     
--
°F
 
Desiccant Dryer
°F
 
Drying Time
     
--
hr
 
Desiccant Dryer
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Back Pressure
psi
 
Screw Speed
rpm
 
Injection Notes
Hot Runner Manifold Temperature: 210°C
Hot Runner Valve Nozzle Temperature: 210°C
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.