| Product Description | |
|
Properties catalyzed with DCBP 50 (2, 4-dichlorobenzoyl 50% active 1.6 part per 100 parts compound).
This product is designed for good low temperature characteristics. Typical applications include low temperature gaskets, low temperature packing, and various aviation applications. KE-5006 BU has a broad range of service temperatures from -100 to +260°C (-148 to +500°F). |
|
| General | |
|
Material Status
|
|
|
Availability
|
|
|
Uses
|
|
|
Appearance
|
|
|
Forms
|
|
|
Processing Method
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
| Elastomers |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength (Yield)
|
|
psi
|
ASTM D412 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D412 |
|
Tear Strength
|
|
lbf/in
|
ASTM D624 |
|
Compression Set (302°F)
|
|
%
|
ASTM D395 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore A)
|
|
|
ASTM D2240 |
| Thermoset |
Nominal Value
|
Unit
|
Test Method
|
|
Demold Time (248°F)
|
|
min
|
|
|
Post Cure Time (302°F)
|
|
hr
|
|
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-5006 BU, Shincor LIM KE5006 BU, Shincor LIM , ShincorLIMKE5006BU, ShincorLIM, KE, LIMKE-5006 BU, LIMKE5006 BU, LIMKE:5006 BU, LIMKE/5006 BU, LIMKE+5006 BU, LIMKE_5006 BU, LIMKE 5006 BU, LIMKE5006, LIMKE, LIMKE5006BU, KE-5006 BU, KE5006 BU, KE:5006 BU, KE/5006 BU, KE+5006 BU, KE_5006 BU, KE 5006 BU, KE5006, 5006BU, LIMKE_5006BU, KE5006BU, KE_5006BU, Silicone, Shincor Sil, 5006KE, 5006LIMKE
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Gaskets, Gasketing.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |