| Product Description | ||||
|
Properties are for a specimen press cured 10 min. @ 170°C.
Catalyzed with C-19A 0.5 phr, C-19B 2.4 phr. Catalyst levels may vary with process method. Contact SHINCOR for recommended levels. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
| Elastomers |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength (Yield)
|
|
psi
|
ASTM D412 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D412 |
|
Tear Strength
|
|
lbf/in
|
ASTM D624 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore A)
|
|
|
ASTM D2240 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-153 U, Shincor LIM KE153 U, Shincor LIM , ShincorLIMKE153U, ShincorLIM, KE, LIMKE-153 U, LIMKE153 U, LIMKE:153 U, LIMKE/153 U, LIMKE+153 U, LIMKE_153 U, LIMKE 153 U, LIMKE153, LIMKE, LIMKE153U, KE-153 U, KE153 U, KE:153 U, KE/153 U, KE+153 U, KE_153 U, KE 153 U, KE153, 153U, LIMKE_153U, KE153U, KE_153U, Silicone, Shincor Sil, 153KE, 153LIMKE
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Tear Strength.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Tubing, Tube, Medical Applications.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |