| Product Description | ||||
|
Catalyzed with 2,5 dimethyl-2,5 di(t-Butyl Peroxy) hexane 100% active.
Press cured 10 min @ 165°C. Oven cured 4 hrs. @ 200°C. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
| Elastomers |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength (Yield)
|
|
psi
|
ASTM D412 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D412 |
|
Tear Strength
|
|
lbf/in
|
ASTM D624 |
|
Compression Set (356°F)
|
|
%
|
ASTM D395 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore A)
|
|
|
ASTM D2240 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-1563 U, Shincor LIM KE1563 U, Shincor LIM , ShincorLIMKE1563U, ShincorLIM, KE, LIMKE-1563 U, LIMKE1563 U, LIMKE:1563 U, LIMKE/1563 U, LIMKE+1563 U, LIMKE_1563 U, LIMKE 1563 U, LIMKE1563, LIMKE, LIMKE1563U, KE-1563 U, KE1563 U, KE:1563 U, KE/1563 U, KE+1563 U, KE_1563 U, KE 1563 U, KE1563, 1563U, LIMKE_1563U, KE1563U, KE_1563U, Silicone, Shincor Sil, 1563KE, 1563LIMKE
|
|||
| Features | |||
|
Features may also be described by the following terms: High Clarity, Good Tear Strength, High Strength, Good Processability, Easy Processing.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Tubing, Tube.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |